Why Engineering Parquet?

Laminated parquet prices vary depending on the quality of the parquet, the weight of the polish on it and the size of the parquet. As the laminated flooring expands, the price increases and decreases as it shrinks.

Underfloor heating is a very popular type of heating in our country. Hot water pipes pass through the concrete floor to heat the surrounding environment. However, if there is no correct...

Solid wood parquet is a floor covering material that is formed by massiveen elements having certain form and thickness and used for centuries...

Engineering parquet is unique and natural floor material which adds value to our places. However, all environmental conditions and storage conditions should be carefully observed for...

Hammer, Saw(Hand Saw, Motor Saw, miter cutter) miter, pencil, drill, punch, wedge, puller iron, If you use Motor, circular automatic saw cut the panels from lower side to upper side if you use hand...

In places where there has the risk of relative humidity in some way (e.g. new buildings, entrance floors), humectants barrier should be used over screed...

Industrial wood production is a type of production that has been in existence for many years in certain countries around the world and has contributed greatly to the critical point of the tree population in this regard...

2 mm. polyethylene blanket /3mm hard polystyrene foam/cork isolation plate etc materials can be used for sound and heat isolation and direct contact of panels with ground in floating...

All engineering parquets, are selectively controlled during raw material, semi- finished product and product stages. However as you can imagine, errors can never be completely eliminated...

Cheap lamine parcels are not very suitable parcels for long use even though they are attractive parcels for the price. This is because the UV lacquer used on them is easy to deform and easy to be scratched...

Although drying in outdoors, drying in precise ovens and 3 layered structures minimize the natural working of massive, massive leaves shall expand because effect of relative humidity in air...

"What are the disadvantages of using cheap parquet?" We can answer the question in several different ways. Although cheap flooring is known to be much more affordable than its counterparts in the market...

Decide the furnishing direction after laying humectants barrier and blanket. Start to furnish the first row after shaving short male edge then place the female edge towards the wall...

Sticking to ground should be at ground level and balanced, all spaces should be closed. Besides this ground where parquet application is applied should be flat and smooth....

If we talk and calculate cost about Engineering parquets application; one of the major allowance is the sticking to ground application. It is performed by directly sticking elements over....

It is very important to use right glue and using it in correct conditions recommended by manufacturer is very important. Place to be applied should be carefully examined and...

If the pipes on ground coincide with short edge of parquet, mark the places of pipes on parquet. Drill the parquets also leaving the expansion gaps around the pipes. Cut the panel as it can pass from center of the circle...

Put a waste part over the ground and cut the door reveal over this. Assemble the parquet that it slight insert inside this reveal. You can use your ground which is floating system applied even...

Parquet Application in Sub-floor heating convenient parquet includes some important key parts out of rules written above and this should be exactly applied. First of all Floor heating where Parquet...

Generally we can assume that ideal place conditions for human life are also ideal for engineering parquet. Relative humidity betweenpercent30-60 will form ideal environmental condition for engineering parquet...

Since engineering Parquets ate polished or oiled after production stage there is no need for scraper polishing after furnishing. But scraper polishing operation can be done many times as in...

Spooning is the situation that edges of parquet is higher and middle part of parquet is lower depending on water and humidity received by Parquet Surface. Increase in relative humidity ratio in environment can also cause spooning...

Oiled surface options give perfect results where traffic circulation is low and the one who wants to reach natural texture of massive and feel it. Oiled surface parquets are recommended for dull and natural appearance...