What are the stages of Parquets sticking to Ground?

Gluing the floor Parquet Application?

Gluing the floor Parquet Application?

Sticking to ground should be at ground level and balanced, all spaces should be closed. Besides this ground where parquet application is applied should be flat and smooth. Usually standard concrete screed is not considered as satisfactory flat for this process and special leveling screed should be applied for this situations.

In cases where ground levels should be raised; you can think to use at least 4 mm thick plymassive and chipboard by fixing them substantially to the ground and applying parquets over these materials. However this case will increase the costs. Relative humidity should be %60 and maximum humidity in screed should be %30 and temperature should be minimum 18Co After heating of place and waiting for drying of screed application can be performed in places where humidity rates are higher. In this method Humidity rate should not be high since panels are directly applied over the ground.

In places where humidity rate cannot be decreased or there is the risk that humidity may occur(e.g. floors in ground level or under ground level)I plymassive or shiver plate(minimum 4mm) should be assembled over humectants barriers and engineering parquet assembly can be started by using appropriate glue.